BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Roading Industry Support Services Ltd - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Roading Industry Support Services Ltd
X-ORIGINAL-URL:https://riss.co.nz
X-WR-CALDESC:Events for Roading Industry Support Services Ltd
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Pacific/Auckland
BEGIN:STANDARD
TZOFFSETFROM:+1300
TZOFFSETTO:+1200
TZNAME:NZST
DTSTART:20230401T140000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1200
TZOFFSETTO:+1300
TZNAME:NZDT
DTSTART:20230923T140000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+1300
TZOFFSETTO:+1200
TZNAME:NZST
DTSTART:20240406T140000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1200
TZOFFSETTO:+1300
TZNAME:NZDT
DTSTART:20240928T140000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+1300
TZOFFSETTO:+1200
TZNAME:NZST
DTSTART:20250405T140000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1200
TZOFFSETTO:+1300
TZNAME:NZDT
DTSTART:20250927T140000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+1300
TZOFFSETTO:+1200
TZNAME:NZST
DTSTART:20260404T140000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1200
TZOFFSETTO:+1300
TZNAME:NZDT
DTSTART:20260926T140000
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20251209T100000
DTEND;TZID=Pacific/Auckland:20251209T170000
DTSTAMP:20260430T004816
CREATED:20250622T190614Z
LAST-MODIFIED:20251106T224217Z
UID:2916-1765274400-1765299600@riss.co.nz
SUMMARY:Installer A Live Online Course September for New Zealand & Australian Learners
DESCRIPTION:This course will be held live online via Team for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your eLogbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. You must also have access to the Teams App on a computer and be able to share your camera and audio to participate in the group. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the eLogbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nFollowing the online course\, you will schedule a time for the knowledge assessment with the assessor. \nPLEASE NOTE \nThis course is held at NZ time. The learner must be online for the full duration of the course and then book a time for the knowledge assessment within 1 week of the course. Failure to attend the full course and knowledge assessment may result in a rebooking fee. \nIf you are booking from Australia\, you can select payment in Australian dollars\, and you will be invoiced by our booking partner\, Solutions In Transport in Australia. \nPayment must be made in full before attending the course.
URL:https://riss.co.nz/training/installer-a-live-online-course-july-for-new-zealand-australian-learners/
LOCATION:Teams Online\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250811T110000
DTEND;TZID=Pacific/Auckland:20250811T170000
DTSTAMP:20260430T004816
CREATED:20250622T190756Z
LAST-MODIFIED:20250622T190918Z
UID:2918-1754910000-1754931600@riss.co.nz
SUMMARY:Installer A Live Online Course August for New Zealand & Australian Learners
DESCRIPTION:This course will be held live online via Team for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your eLogbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. You must also have access to the Teams App on a computer and be able to share your camera and audio to participate in the group. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the eLogbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nFollowing the online course\, you will schedule a time for the knowledge assessment with the assessor. \nPLEASE NOTE \nThis course is held at NZ time. The learner must be online for the full duration of the course and then book a time for the knowledge assessment within 1 week of the course. Failure to attend the full course and knowledge assessment may result in a rebooking fee. \nIf you are booking from Australia\, you can select payment in Australian dollars\, and you will be invoiced by our booking partner\, Solutions In Transport in Australia. \nPayment must be made in full before attending the course.
URL:https://riss.co.nz/training/installer-a-live-online-course-august-for-new-zealand-australian-learners/
LOCATION:Teams Online\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250528T083000
DTEND;TZID=Pacific/Auckland:20250528T160000
DTSTAMP:20260430T004816
CREATED:20250414T002506Z
LAST-MODIFIED:20250414T002506Z
UID:2821-1748421000-1748448000@riss.co.nz
SUMMARY:Installer A Course Hamilton
DESCRIPTION:This course is for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your eLogbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. \n  \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the eLogbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nYou will complete the knowledge assessment with your trainer following the completion of the course materials. \nA digital copy of the workbook will be provided before training\, which you can print if you like\, and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS\, or Safari will be required for the test. We do have a limited number of computers available\, should you need them to complete the knowledge assessment. \nPayment of $580+GST is required before attendance at the Workshop.
URL:https://riss.co.nz/training/installer-a-course-hamilton/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250523T100000
DTEND;TZID=Pacific/Auckland:20250523T100000
DTSTAMP:20260430T004816
CREATED:20250414T004428Z
LAST-MODIFIED:20250513T191859Z
UID:2823-1747994400-1747994400@riss.co.nz
SUMMARY:Installer A Live Online Course May for New Zealand & Australian Learners
DESCRIPTION:This course will be held live online via Team for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your eLogbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. You must also have access to the Teams App on a computer and be able to share your camera and audio to participate with the group. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the eLogbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nFollowing the online course\, you will schedule a time for the knowledge assessment with the assessor. \nPLEASE NOTE \nThis course is held at NZ time. The learner must be online for the full duration of the course and then book a time for the knowledge assessment within 1 week of the course. Failure to attend the full course and knowledge assessment may result in a rebooking fee. \nIf you are booking from Australia\, you can select payment in Australian dollars\, and you will be invoiced by our booking partner\, Solutions In Transport in Australia. \nPayment must be made in full before attendance of the course.
URL:https://riss.co.nz/training/installer-a-live-online-course-may-for-new-zealand-australian-learners/
LOCATION:Teams Online\, New Zealand
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250411T100000
DTEND;TZID=Pacific/Auckland:20250411T170000
DTSTAMP:20260430T004816
CREATED:20250306T215308Z
LAST-MODIFIED:20250306T215308Z
UID:2807-1744365600-1744390800@riss.co.nz
SUMMARY:Installer A Live Online Course April
DESCRIPTION:This course will be held live online via Team for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your eLogbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. You must also have access to the Teams App on a computer and be able to share your camera and audio to participate with the group. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the eLogbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nFollowing the online course\, you will schedule a time for the knowledge assessment with the assessor. \nPLEASE NOTE \nThis course is held at NZ time. The learner must be online for the full duration of the course and then book a time for the knowledge assessment within 1 week of the course. Failure to attend the full course and knowledge assessment may result in a rebooking fee. \nIf you are booking from Australia\, you can select payment in Australian dollars\, and you will be invoiced by our booking partner\, Solutions In Transport in Australia. \nPayment must be made in full before attendance of the course.
URL:https://riss.co.nz/training/installer-a-live-online-course-april/
LOCATION:Teams Online\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250324T100000
DTEND;TZID=Pacific/Auckland:20250324T170000
DTSTAMP:20260430T004816
CREATED:20250227T002019Z
LAST-MODIFIED:20250227T002019Z
UID:2789-1742810400-1742835600@riss.co.nz
SUMMARY:Installer A Live Online Course
DESCRIPTION:This course will be held live online via Team for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your eLogbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. You must also have access to the Teams App on a computer and be able to share your camera and audio to participate with the group. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the eLogbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nFollowing the online course\, you will schedule a time for the knowledge assessment with the assessor. \nPLEASE NOTE \nThis course is held at NZ time. The learner must be online for the full duration of the course and then book a time for the knowledge assessment within 1 week of the course. Failure to attend the full workshop of assessment may result in a rebooking fee. \nIf you are booking from Australia\, you can select payment in Australian dollars\, and you will be invoiced by our booking partner\, Solutions In Transport in Australia. \nPayment must be made in full before attendance of the course.
URL:https://riss.co.nz/training/installer-a-live-online-course/
LOCATION:Teams Online\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250310T100000
DTEND;TZID=Pacific/Auckland:20250310T170000
DTSTAMP:20260430T004816
CREATED:20250217T033149Z
LAST-MODIFIED:20250217T033149Z
UID:2743-1741600800-1741626000@riss.co.nz
SUMMARY:Installer A Online Course
DESCRIPTION:This course will be held live online via Team for installers who are crew leaders and responsible for the sign-off and handover of completed systems. After completing the course\, knowledge assessment\, and the generic components of your e-Logbook\, the learner will need to complete the Installer B units for the systems they use to become a fully accredited installer. \nTo book this course\, you must have completed the Operative course and hold your Operative eCard. You must also have access to the Teams App on a computer and be able to share your camera and audio to participate with the group. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nFollowing the online course\, you will schedule a time for the knowledge assessment with the assessor. \nPLEASE NOTE \nThis course is held at NZ time. The learner must be online for the full duration of the course and then book a time for the knowledge assessment within 1 week of the course. Failure to attend the full workshop of assessment may result in a rebooking fee. \nIf you are booking from Australia\, you can select payment in Australian Dollars\, and you will be invoiced from our booking partner\, Solutions In Transport in Australia. \nPayment must be made in full before attendance of the course.
URL:https://riss.co.nz/training/installer-a-online-course/
LOCATION:Teams Online\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20250114T080000
DTEND;TZID=Pacific/Auckland:20250115T170000
DTSTAMP:20260430T004816
CREATED:20241124T184337Z
LAST-MODIFIED:20250105T205510Z
UID:2653-1736841600-1736960400@riss.co.nz
SUMMARY:ASHTAS Installer A&B Block Course Hamilton
DESCRIPTION:This Block Course workshop is for installers who will lead the crews and sign off on road safety barrier system installation. Day one is the Installer A workshop and day two is the Installer B modules for Semi-rigid\, Flexible\, and Terminals/Crash Cushions. \nOn completion of this workshop\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\nReady to complete their eLogbook for the practical assessment in Semi-rigid\, Flexible\, and Terminals/Crash Cushions\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nThe learner will complete a knowledge evaluation at the end of each module. Following the successful completion of the Installer A test they will be issued an updated eCard from their previous Operative eCard status. Following the successful completion of each Installer B test you will be issued an e-logbook to record installation evidence towards completing their Installer Status. You will then submit our eLogbook for assessment and pay the fee for its review. You will also be issued your updated eCard to demonstrate your Installer Status. \n 
URL:https://riss.co.nz/training/ashtas-installer-ab-block-course-hamilton-2/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20250107
DTEND;VALUE=DATE:20260101
DTSTAMP:20260430T004816
CREATED:20241216T220814Z
LAST-MODIFIED:20250331T215216Z
UID:2676-1736208000-1767225599@riss.co.nz
SUMMARY:ASHTAS Operative eLearning and Test New Zealand 2025
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing a Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThis E-Learning course is broken into five sections\, the four learning modules and a separate online examination. \nThe course is approximately 5 hours in length. \nThe four modules reflect the core learning outcomes of this course. \nThese are: \n\nModule one\, provides a general overview and the role various parties play within this training scheme\, including you.\nModule two provides an introduction to the Scheme. It provides some basic information regarding how the scheme is structured\, how individuals can progress\, and a section on quality.\nModule three looks at Road Safety Hardware performance and use.\nModule four covers highway terminology and elements of the barrier system\, and how this fits with your activities.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nThe test is taken under Proctored exam conditions (PLEASE READ BELOW) \nPlease ensure you follow these conditions during the assessment. Not adhering to these conditions will result in the exam being voided. \n\n\n You must not wear headphones or earphones\nQuestions or answers must not be read out loud\nYou must be in a room on your own\nYou should not leave the room at any point during the assessment\nYou should not confer or speak with others\nYou should not use mobile phones or the Internet at any time\nYou should not use any training materials or notes unless specifically advised\nThe environment must be clear of all paperwork and your phone must be turned off\nID is mandatory (e.g.\, a driver’s license or passport)\n\nYou can only use online proctor support for IT issues during the exam\nYou will require a steady internet connection with a minimum upload speed of 1.5 Mbps. We strongly recommend using an ethernet cable to ensure a stable connection. \nResults will only be fully confirmed once Lantra has carried out quality assurance on the assessment. \n\nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available\, should you need them to complete the test. \nPayment of $546.00 + GST is required at the time of booking and access to the learning material will be provided within 24 hours to the learner.
URL:https://riss.co.nz/training/ashtas-operative-elearning-and-test-new-zealand-2025/
LOCATION:eLearning\, Teams and Online Platform\, Waikato\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Operative.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20250107
DTEND;VALUE=DATE:20260101
DTSTAMP:20260430T004816
CREATED:20241216T222507Z
LAST-MODIFIED:20250331T215057Z
UID:2679-1736208000-1767225599@riss.co.nz
SUMMARY:ASHTAS Operative eLearning and Test Australia 2025
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing a Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThis E-Learning course is broken into five sections; the four learning modules and a separate online examination. \nThe course is approximately 5 hours in length. \nThe four modules reflect the core learning outcomes of this course. \nThese are: \n\nModule one provides a general overview and the role various parties play within this training scheme\, including you.\nModule two provides an introduction to the Scheme. It provides some basic information regarding how the scheme is structured\, how individuals can progress\, and a section on quality.\nModule three looks at Road Safety Hardware performance and use.\nModule four covers highway terminology and elements of the barrier system\, and how this fits with your activities.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nThe test is taken under Proctored exam conditions (PLEASE READ BELOW) \nPlease ensure you follow these conditions during the assessment. Not adhering to these conditions will result in the exam being voided. \n\n\n You must not wear headphones or earphones\nQuestions or answers must not be read out loud\nYou must be in a room on your own\nYou should not leave the room at any point during the assessment\nYou should not confer or speak with others\nYou should not use mobile phones or the Internet at any time\nYou should not use any training materials or notes unless specifically advised\nThe environment must be clear of all paperwork and your phone must be turned off\nID is mandatory (e.g.\, a driver’s license or passport)\n\nYou can only use online proctor support for IT issues during the exam\nYou will require a steady internet connection with a minimum upload speed of 1.5 Mbps. We strongly recommend using an ethernet cable to ensure a stable connection. \nResults will only be fully confirmed once Lantra has carried out quality assurance on the assessment. \n\nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS\, or Safari\, will be required for the test. We do have computers available\, should you need them to complete the test. \nPayment of $537.00 + GST AUD is required before access will be provided to the learner. Learning material will normally be provided within 24 hours to the learner following payment.
URL:https://riss.co.nz/training/ashtas-operative-elearning-and-test-australia-2025/
LOCATION:eLearning Australia\, Australia
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Operative.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241210T080000
DTEND;TZID=Pacific/Auckland:20241211T170000
DTSTAMP:20260430T004816
CREATED:20241124T183838Z
LAST-MODIFIED:20241209T013754Z
UID:2651-1733817600-1733936400@riss.co.nz
SUMMARY:ASHTAS Installer A&B Block Course Hamilton
DESCRIPTION:This Block Course workshop is for installers who will lead the crews and sign off on road safety barrier system installation. Day one is the Installer A workshop and day two is the Installer B modules for Semi-rigid\, Flexible\, and Terminals/Crash Cushions. \nYou are required to have already completed the Operative Workshop before attending this workshop. On completion of this workshop\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\nReady to complete their eLogbook for the practical assessment in Semi-rigid\, Flexible\, and Terminals/Crash Cushions\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nThe learner will complete a knowledge evaluation at the end of each module. Following the successful completion of the Installer A test they will be issued an updated eCard from their previous Operative eCard status. Following the successful completion of each Installer B test you will be issued an e-logbook to record installation evidence towards completing their Installer Status. You will then submit our eLogbook for assessment and pay the fee for its review. You will also be issued your updated eCard to demonstrate your Installer Status.
URL:https://riss.co.nz/training/ashtas-installer-ab-block-course-hamilton/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241209T080000
DTEND;TZID=Pacific/Auckland:20241209T170000
DTSTAMP:20260430T004816
CREATED:20241124T182442Z
LAST-MODIFIED:20250815T050031Z
UID:2647-1733731200-1733763600@riss.co.nz
SUMMARY:ASHTAS Operative Hamilton
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing a Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThe course will cover the basics of barriers and provide a basic understanding of the accreditation scheme. \n\nModule 1: Overview of the parties involved and learning outcomes\nModule 2: Introduction to the Scheme\, training requirements\, and a brief history of road restraint systems and the quality control\, assurance\, and standards.\nModule 3: System Performance and Testing\nModule 4: Terminology and installation requirements.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $150. \nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available should you need them to complete the test. \nPayment of $640+GST is required before attendance at the Workshop. \n      
URL:https://riss.co.nz/training/ashtas-operative-hamilton-3/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Operative.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241112T080000
DTEND;TZID=Pacific/Auckland:20241112T170000
DTSTAMP:20260430T004816
CREATED:20241004T022953Z
LAST-MODIFIED:20241025T051934Z
UID:2541-1731398400-1731430800@riss.co.nz
SUMMARY:ASHTAS Installer B Workshop Palmerston North
DESCRIPTION:Before you attend this workshop you must have completed the Installer A workshop and assessment. \nThis workshop is for installers who will lead the crews and sign off on installing Semi-Rigid\, Terminals and Flexible Systems. Please register for the systems learning you wish to attend. You will only complete the learning for the systems you choose. \nThe day will be split as follows \n\nSemi-rigid barriers and their generic use and performance criteria\nTerminals and Crash Cushions\, how they work\, and key elements to consider when installing\nFlexible system general awareness about the difference between ‘Legacy’ and ‘Accepted” products\, how they work\, and assembly processes.\n\nFollowing each section there will be a short test to ensure the knowledge component is understood and you will then need to complete your eLogbook requirements for each system. \nOnce the learner has completed the eLogbook you can then submit for assessment. There will be a fee of $415+GST for each review and issuing of a new e-card and certificate. \n  \nPayment for the workshop must be made before attendance at the workshop.
URL:https://riss.co.nz/training/ashtas-installer-b-workshop-palmerston-north/
LOCATION:Shadzz Motel & Conference Centre\, 145 Fitzherbert Avenue\, West End\, Palmerston North\, 4410\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241111T080000
DTEND;TZID=Pacific/Auckland:20241111T170000
DTSTAMP:20260430T004816
CREATED:20241004T022635Z
LAST-MODIFIED:20241025T051841Z
UID:2539-1731312000-1731344400@riss.co.nz
SUMMARY:ASHTAS Installer A Workshop Palmerston North
DESCRIPTION:This workshop is for installers who will be leading the crews and signing off on installation of all barrier types. Following on from the Installer A workshop the learner will need to complete Installer B modules relevant to the systems they are installing. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nThe learner will then complete a knowledge evaluation and then be issued their e-logbook for recording installation evidence towards completing their Installer Status. \nYou have the option to add to your registration an installation\, inspection recording tool that will help record evidence for your e-logbook and also provide clients a signed inspection certificate. It works on your phone or tablet and your subscription to the app will last for 3 years to align with your acredication refresher.
URL:https://riss.co.nz/training/ashtas-installer-a-workshop-palmerston-north/
LOCATION:Shadzz Motel & Conference Centre\, 145 Fitzherbert Avenue\, West End\, Palmerston North\, 4410\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241108T080000
DTEND;TZID=Pacific/Auckland:20241108T170000
DTSTAMP:20260430T004816
CREATED:20241004T051046Z
LAST-MODIFIED:20241105T002125Z
UID:2547-1731052800-1731085200@riss.co.nz
SUMMARY:ASHTAS Installer B Workshop Wellington
DESCRIPTION:Before you attend this workshop you must have completed the Installer A workshop and assessment. \nThis workshop is for installers who will lead the crews and sign off on installing Semi-Rigid\, Terminals and Flexible Systems. Please register for the systems learning you wish to attend. You will only complete the learning for the systems you choose. \nThe day will be split as follows \n\nSemi-rigid barriers and their generic use and performance criteria\nTerminals and Crash Cushions\, how they work\, and key elements to consider when installing\nFlexible system general awareness about the difference between ‘Legacy’ and ‘Accepted” products\, how they work\, and assembly processes.\n\nFollowing each section there will be a short test to ensure the knowledge component is understood and you will then need to complete your eLogbook requirements for each system. \nOnce the learner has completed the eLogbook you can then submit for assessment. There will be a fee of $415+GST for each review and issuing of a new e-card and certificate. \n  \nPayment for the workshop must be made before attendance at the workshop.
URL:https://riss.co.nz/training/ashtas-installer-b-workshop-wellington/
LOCATION:Silverstream Retreat\, 3 Reynolds Bach Drive\, Lower Hutt\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241107T080000
DTEND;TZID=Pacific/Auckland:20241107T170000
DTSTAMP:20260430T004816
CREATED:20241004T050803Z
LAST-MODIFIED:20241105T002011Z
UID:2544-1730966400-1730998800@riss.co.nz
SUMMARY:ASHTAS Installer A Workshop Wellington
DESCRIPTION:his workshop is for installers who will be leading the crews and signing off on installation of all barrier types. Following on from the Installer A workshop the learner will need to complete Installer B modules relevant to the systems they are installing. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nThe learner will then complete a knowledge evaluation and then be issued their e-logbook for recording installation evidence towards completing their Installer Status. \nYou have the option to add to your registration an installation\, inspection recording tool that will help record evidence for your e-logbook and also provide clients a signed inspection certificate. It works on your phone or tablet and your subscription to the app will last for 3 years to align with your acredication refresher.
URL:https://riss.co.nz/training/ashtas-installer-a-workshop/
LOCATION:Silverstream Retreat\, 3 Reynolds Bach Drive\, Lower Hutt\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241104T083000
DTEND;TZID=Pacific/Auckland:20241104T150000
DTSTAMP:20260430T004816
CREATED:20240810T010607Z
LAST-MODIFIED:20250815T050031Z
UID:2353-1730709000-1730732400@riss.co.nz
SUMMARY:ASHTAS Operative Auckland
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThe course will cover barrier basics and a basic understanding of the Accreditation scheme. \n\nModule 1: Overview of the parties involved and learning outcomes\nModule 2: Introduction to the Scheme\, training requirements\, and a brief history of road restraint systems and the quality control\, assurance\, and standards.\nModule 3: System Performance and Testing\nModule 4: Terminology and installation requirements.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available should you need them to complete the test. \nPayment of $640+GST is required before attendance at the Workshop. \n      
URL:https://riss.co.nz/training/operative-workshop-auckland/
LOCATION:DGM Auckland Airport\, 39 Richard Pearse Dr\, Airport Oaks\, Auckland\, 2022\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241022T080000
DTEND;TZID=Pacific/Auckland:20241022T170000
DTSTAMP:20260430T004816
CREATED:20241004T021050Z
LAST-MODIFIED:20241014T004227Z
UID:2537-1729584000-1729616400@riss.co.nz
SUMMARY:ASHTAS Installer B Workshop Hamilton
DESCRIPTION:You must have completed the Installer A workshop and assessment before attending this workshop \nThis workshop is for installers who will lead the crews and sign off on the installation of Semi-Rigid\, Terminals and Flexible Systems. Please register for the systems learning you wish to attend. You will only complete the learning for the systems you choose. \nThe day will be split as follows \n\nSemi-rigid barriers and their generic use and performance criteria\nTerminals and Crash Cushions\, how they work\, and key elements to consider when installing\nFlexible system general awareness about the difference between ‘Legacy’ and ‘Accepted” products\, how they work\, and assembly processes.\n\nFollowing each section there will be a short test to ensure the knowledge component is understood and will then need to complete your eLogbook requirements for each system. \nOnce the learner has completed the eLogbook you can then submit for assessment. There will be a fee of $415+GST for each review and issuing of a new e-card and certificate. \n  \nPayment for the workshop must be made before attendance at the workshop.
URL:https://riss.co.nz/training/ashtas-installer-b-workshop-hamilton/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20241021T083000
DTEND;TZID=Pacific/Auckland:20241021T170000
DTSTAMP:20260430T004816
CREATED:20241002T172945Z
LAST-MODIFIED:20241004T014513Z
UID:2447-1729499400-1729530000@riss.co.nz
SUMMARY:ASHTAS Installer A Workshop Hamilton
DESCRIPTION:This workshop is for installers who will be leading the crews and signing off installation of all barrier types. Following on from the Installer A workshop the learner will need to complete Installer B modules relevant to the systems they are installing. \nOn completion of this module\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nThe learner will then complete a Knowledge Evaluation and then be issued their e-logbook for recording installations evidence towards completing their Installer Status. \nYou have the option to add to your registration an installation\, inspection recording tool that will help record evidence for your e-logbook and also provide clients a signed inspection certificate. It works on your phone or tablet and your subscription to the app will last for 3 years to align with your acredication refresher.
URL:https://riss.co.nz/training/ashtas-installer-a-workshop-hamilton/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20240821T083000
DTEND;TZID=Pacific/Auckland:20240821T150000
DTSTAMP:20260430T004816
CREATED:20240725T061611Z
LAST-MODIFIED:20250815T050032Z
UID:2322-1724229000-1724252400@riss.co.nz
SUMMARY:Operative Workshop Hamilton
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThe course will cover barrier basics and a basic understanding of the Accreditation scheme. \n\nModule 1: Overview of the parties involved and learning outcomes\nModule 2: Introduction to the Scheme\, training requirements\, and a brief history of road restraint systems and the quality control\, assurance\, and standards.\nModule 3: System Performance and Testing\nModule 4: Terminology and installation requirements.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available should you need them to complete the test. \nPayment of $640+GST is required before attendance at the Workshop. \n     
URL:https://riss.co.nz/training/operative-workshop-hamilton/
LOCATION:Traffic Management Waikato Training Room\, 1 Karaka Street\, Hamilton 3204\, Hamilton\, Waikato\, 3204\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20240711T083000
DTEND;TZID=Pacific/Auckland:20240711T153000
DTSTAMP:20260430T004816
CREATED:20240522T232422Z
LAST-MODIFIED:20250815T050032Z
UID:2165-1720686600-1720711800@riss.co.nz
SUMMARY:ASHTAS Operative Workshop Wellington
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThe course will cover barrier basics and a basic understanding of the Accreditation scheme. \n\nModule 1: Overview of the parties involved and learning outcomes\nModule 2: Introduction to the Scheme\, training requirements\, and a brief history of road restraint systems and the quality control\, assurance\, and standards.\nModule 3: System Performance and Testing\nModule 4: Terminology and installation requirements.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available should you need them to complete the test. \nPayment of $640+GST is required before attendance at the Workshop. \n       
URL:https://riss.co.nz/training/ashtas-operative-workshop-wellington/
LOCATION:Silverstream Retreat\, 3 Reynolds Bach Drive\, Lower Hutt\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20240708T083000
DTEND;TZID=Pacific/Auckland:20240708T153000
DTSTAMP:20260430T004816
CREATED:20240522T232227Z
LAST-MODIFIED:20250815T050032Z
UID:2162-1720427400-1720452600@riss.co.nz
SUMMARY:ASHTAS Operative Workshop Palmerston North
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThe course will cover barrier basics and a basic understanding of the Accreditation scheme. \n\nModule 1: Overview of the parties involved and learning outcomes\nModule 2: Introduction to the Scheme\, training requirements\, and a brief history of road restraint systems and the quality control\, assurance\, and standards.\nModule 3: System Performance and Testing\nModule 4: Terminology and installation requirements.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available should you need them to complete the test. \nPayment of $640+GST is required before attendance at the Workshop. \n       
URL:https://riss.co.nz/training/ashtas-operative-workshop-palmerston-north/
LOCATION:Shadzz Motel & Conference Centre\, 145 Fitzherbert Avenue\, West End\, Palmerston North\, 4410\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20240520T083000
DTEND;TZID=Pacific/Auckland:20240520T160000
DTSTAMP:20260430T004816
CREATED:20240420T001737Z
LAST-MODIFIED:20250815T050032Z
UID:2097-1716193800-1716220800@riss.co.nz
SUMMARY:ASHTAS Operative Training
DESCRIPTION:As an operative\, you are a member of the installation crew actively installing Road Safety Barrier (RSB) under supervision. This course is the starting point of achieving Barrier installer-specific training as set out in the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS) \nThe course will cover barrier basics and a basic understanding of the Accreditation scheme. \n\nModule 1: Overview of the parties involved and learning outcomes\nModule 2: Introduction to the Scheme\, training requirements\, and a brief history of road restraint systems and the quality control\, assurance\, and standards.\nModule 3: System Performance and Testing\nModule 4: Terminology and installation requirements.\n\nFollowing the learning you will undertake a multi-choice test and must answer at least 24 (80%) questions correctly to pass out of the 40 questions. You have one hour to complete the test once you have logged in. If you fail the test you can re-sit it after 21 days. The re-sit fee is $200. \nA workbook will be provided at the start of the training and a laptop or tablet running Chrome\, Edge\, Firefox\, iOS or Safari\, will be required for the test. We do have computers available should you need them to complete the test. \nPayment is required before attendance at the Workshop. \n       
URL:https://riss.co.nz/training/operative-training/
LOCATION:JetPark Hamilton Airport Hotel & Conference Center\, 201 Airport Road\, Hamilton Airport 3282\, Waikato\, 3282\, New Zealand
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/04/ASHTAS.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20240331T080000
DTEND;TZID=Pacific/Auckland:20240401T170000
DTSTAMP:20260430T004816
CREATED:20241219T223227Z
LAST-MODIFIED:20250331T214316Z
UID:2686-1711872000-1711990800@riss.co.nz
SUMMARY:ASHTAS Installer A&B Block Course Melbourne
DESCRIPTION:This Block Course workshop is for installers who will be leading the crews and signing off on the installation of road safety barrier systems. Day one is the Installer A workshop and day two is the Installer B modules for Semi-rigid\, Flexible\, and Terminals/Crash Cushions. You must have completed the Operative training to attend this workshop. \nOn completion of this workshop\, the candidate will: \n\nUnderstand the general requirements for installation\, inspection\, maintenance\, and repair of Road Safety Barrier Systems (RSBS)\nHave an understanding of the Installer Requirements within the ASHTAS Training Framework\nBe able to use the e-logbook to gather evidence for the Installer qualification\nReady to complete their eLogbook for the practical assessment in Semi-rigid\, Flexible\, and Terminals/Crash Cushions\n\nThe areas covered within the workshop: \n\nASHTAS e-logbook\nSite Safety\nTypical Installer Activities\nSetting Out\nPlant & Equipment\nEarthworks & Foundations\nAnchorages\nFasteners\nVerification of Installation\nHandover\n\nAt the end of each module\, the learner will complete a knowledge evaluation. Following the successful completion of the Installer A test they will be issued an updated eCard and following the successful completion of each Installer B test you will be issued an e-logbook to record installation evidence towards completing their Installer Status. You will then submit your eLogbook for assessment and pay the fee for its review. You will also be issued your updated eCard to demonstrate your Installer Status. \n  \nThis block course costs AUD$2005+GST and will be invoiced by our Australia course broker Solutions in Transport. Payment is required before attendance at the course. If you book 5 or more at the same time you will receive a 5% group discount.
URL:https://riss.co.nz/training/ashtas-installer-ab-block-course-melbourne/
LOCATION:TBC Melbourne\, Melbourne\, Victoria\, Australia
CATEGORIES:Safety Hardware Training and Accreditation Scheme (ASHTAS)
ATTACH;FMTTYPE=image/webp:https://riss.co.nz/wp-content/uploads/2024/09/Installer-A.webp
ORGANIZER;CN="Joseph Rosendaal":MAILTO:joseph@riss.co.nz
END:VEVENT
END:VCALENDAR